Why Won’t My Nikon D60 Focus? Here’s The Answer You Didn’t Expect
What To Know
- To do this, press the “AF/MF” button on the back of the camera and select “MF” on the dial.
- To do this, press the “Multi-selector” button on the back of the camera and use the Multi-selector to move the focus point to the subject.
- The D60 has five autofocus points, and you can adjust which point is used by pressing the “Info” button and then use the multi-selector to choose the point you want to use.
Why won’t my Nikon D60 focus? This is a common question that many photographers ask. The Nikon D60 is a great camera, but it has its issues. One of the main issues is focus. Sometimes the camera will not focus on the subject, or it will not focus correctly.
Why Won’t My Nikon D60 Focus?
If your Nikon D60 won’t focus at all, there are three possible issues.
1. Clean the Lens
Sometimes, dust or other debris can get stuck inside the lens and prevent it from focusing properly. To clean the lens, use a blower or a can of compressed air to blow away any dust or dirt. If that doesn’t work, you can try using a cotton swab dipped in lens cleaning solution to gently clean the lens. Be sure to avoid getting any liquid inside the camera.
2. Set the Focus Mode
If your Nikon D60 is not focusing in auto mode, try switching to manual focus. To do this, press the “AF/MF” button on the back of the camera and select “MF” on the dial. Then, use the focus ring on the lens to focus.
3. Check the Focus Points
If your Nikon D60 is not focusing on the subject you want, try adjusting the focus points. To do this, press the “Multi-selector” button on the back of the camera and use the Multi-selector to move the focus point to the subject.
If the issue persists, it may be a hardware issue and you’ll need to send the camera in for repair.
Why Is My Nikon D60 Not Focusing?
- 1. Clean the camera lens and viewfinder: Sometimes, dust or dirt can accumulate on the lens or viewfinder, causing the camera to not focus properly. Use a soft cloth to gently wipe the lens and viewfinder to remove any debris.
- 2. Check the autofocus settings: Make sure that the autofocus mode is set correctly. The D60 has three autofocus modes: single autofocus (S), continuous autofocus (C), and manual autofocus (M).
- 3. Adjust the autofocus area: The D60 has five autofocus points, and you can adjust which point is used by pressing the “Info” button and then use the multi-selector to choose the point you want to use.
- 4. Check the lens: If you are using a non-Nikkor lens, it may not be fully compatible with the D60’s autofocus system. Try using a Nikon lens to see if the problem persists.
- 5. Check for firmware updates: Nikon occasionally releases firmware updates for its cameras, which can sometimes fix autofocus issues. Visit the Nikon website to see if any firmware updates are available for your D60.
How Do I Fix My Nikon D60 Focus?
To fix a Nikon D60 focus, you can try these steps:
1. Clean the contacts on the lens and camera body. To do this, use a soft cloth or cotton swab dipped in rubbing alcohol.
2. Remove any dirt or debris that may be on the lens. To do this, use a blower or a soft brush.
3. Check that the aperture ring on the lens is set to “A” or “Auto”.
4. Try a different lens. If the focus is still off, the issue may be with the camera body.
5. Try a different camera body. If the focus is still off, the issue may be with the lens.
6. Take the camera to a professional for repair.
If none of these steps work, you may need to take the camera to a professional for repair.
How Do I Calibrate My Nikon D60 Focus?
To calibrate your Nikon D60 focus, follow these steps:
1. Set the camera to manual focus.
2. Set the lens to infinity.
3. Take a picture and zoom in on the image.
4. Adjust the focus ring until the image is sharp.
5. Press the shutter release button halfway down.
6. Take a picture and zoom in on the image.
7. Adjust the focus ring until the image is sharp.
8. Press the shutter release button halfway down.
9. Take a picture and zoom in on the image.
10. Adjust the focus ring until the image is sharp.
Once you have completed these steps, your camera should be calibrated and ready to use.
How Do I Clean My Nikon D60 Focus?
Cleaning your Nikon D60 focus is essential to maintain accurate and precise focus on your subject. Here are a few easy steps to clean your Nikon D60 focus:
1. Turn off your Nikon D60 camera and remove the lens.
2. Use a blower brush to remove any dust or debris from the lens and camera body.
3. If there is still dust or debris on the lens or camera body, use a microfiber cloth to gently wipe it off.
4. Inspect the lens for any smudges or fingerprints. If present, use a lens cleaning solution and a microfiber cloth to clean the lens.
5. If necessary, use a lens brush to remove any stubborn debris.
6. Reattach the lens to the camera and turn the camera back on.
7. Take a few test shots to ensure that the focus is accurate.
By following these easy steps, you can ensure that your Nikon D60 focus remains clean and accurate for all of your photography needs.
How Do I Adjust My Nikon D60 Focus?
Hi,
Adjusting focus on your Nikon D60 is easy. First, set your camera to autofocus mode. You can do this by pressing the “AF” button on your camera. Once you’re in autofocus mode, you can use the “Zoom” button on your camera to zoom in or out on your subject. To focus, press the shutter release button halfway down. The camera will focus on the area you selected.
If you want to focus on a specific area, you can use the “AF Point Selection” button on your camera. This button allows you to select a specific area in the frame to focus on. Just press the button and use the arrow keys on your camera to select the area you want to focus on.
You can also adjust the focus of your Nikon D60 by using the “Focus Mode” dial on your camera. This dial allows you to choose between different focus modes, such as single-point AF or continuous AF. Single-point AF focuses on a specific area in the frame, while continuous AF focuses on a moving subject.
To adjust the focus using the Focus Mode dial, just turn the dial to the desired mode. Then, use the “Zoom” button to zoom in or out on your subject, and press the “Shutter Release” button halfway down to focus on that area.
The Bottom Line
In conclusion, if your Nikon D60 won’t focus, there are several potential solutions you can try. First, check to make sure your lens is properly attached and that the camera is set to the correct autofocus mode. If those solutions don’t work, you may need to clean your camera’s autofocus sensor or contacts. If all else fails, you may need to send your camera in for repair.
